Oil Air Eliminator

Wuxi Xianglong Plastic Technology Co.,Ltd is one of the leading China oil air eliminator manufacturers, welcome to wholesale cheap PP mist eliminator from our factory. Quick Details Dimension(L*W*H): Depends Certification: ISO9001 Warranty: 12 Months After-sales Service Provided: Engineers available to service machinery overseas colour: white, black, etc material: PP,PVC,FRP size;: 125mm,150mm,175mm..... water mist eliminator: water mist eliminator Packaging & Delivery Packaging Details: air eliminator will be packing as your request. Delivery Detail: 20 days cooling tower drift eliminator The high efficiency drift eliminator is proposed in this project to greatly decrease the drift of cooling tower. -Type: Model SJ arced drift eliminator with resistance tendon -Material: Advanced PVC with additive to improve the performance of resistance ageing and anti-ultraviolet Work Principle Model SJ drift eliminator is an amended product by adding a resistance tendon on the basis of the old arced drift eliminator so as to effectively avoid the loss of 2nd drift, thus it makes the rate of eliminating drift raise a quantity grade in comparison with the old one. Feature of Drift Eliminator 1). Its rate of drift is less than 0.001% of the circulating water flow rate, which is merely one fifth of the allowance value stipulated in GB7190.2-2008. The lower rate of drift helps to prolong the service life of fan due to decrease contact between the fan blade and the moist air, and helps to decrease the usage of chemical. 2). Lower rater of drift helps to reduce the impact to the boundary environment. 3). Its resistance is about 0.8mmH2O at 2.8m/s air velocity. Low resistance decreases the power consumption of fan, and reduces the cost. 4). Made of advanced PVC with additive to improve the performance of resistance ageing and anti-ultraviolet, its design life is 20 years. 5). Assembly with plug-in method increases rigidity and makes the assembly easier. Drift Eliminators, made out of rigid PVC, are designed to remove entrained particles from air steam efficiently, with minimum pressure drop, thereby reducing the fan power requirement when the air passes through the Drift Eliminator. Water droplets are separated from the air drift at the three direction change points on the drift eliminator. For Crossflow tower applications, the almost vertical water conduits provided by the SPC 100 drift eliminator remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry. The special locking pin arrangement for SPC-100 facilitates quick and simple assembly at site. >>>Separation steps : A gas into the mist eliminator is divided into many single strands of channel; B in the inertia force, under the action of droplet entrainment in the collision in the corrugated plate chip formation fluid film; C liquid membrane with air move forward to turning break down; Corrugated plate demister work plan D is not removed from the droplet entrainment in the next few turning through the same effect has been thoroughly clear. Features : Small volume, light weight, small resistance a. no need to enter into tower to clean, repair, or replace. b. Easy clean, long life, stable performance c. Short repairing time, low cost, simple structure d. Blind plate can be installed to meet low load operation, increasing adaptability and application range. e. Gas and liquid has their each path, avoiding re-entrainment and increasing efficiency.